Ip Rip Password - 3Com SuperStack II 9300 Command Reference Manual

ip rip password

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Sets the IP RIP-2 password so that you can choose the IP interfaces that
can put RIP-2 updates into their routing tables.
Valid Minimum Abbreviation
ip ri pa
Important Considerations
If the sending interface has an IP RIP-2 password, the receiving
interface must have the same IP RIP-2 password. If the receiving
interface has a different password or a null password, its routing table
is not updated.
If you are using RIP-1, do not use the password option.
You cannot use the ASCII string
reserved to indicate the default password, which is a null value.
Options
Prompt Description
IP interfaces Index number of the IP interfaces
that you want to allow to receive
route updates
Password Combination of characters that
you set as the RIP-2 password
IP RIP Password Example
Select menu option (ip/rip): password
Select IP interfaces (1,2|all|?): 1
Interface 1 - Enter password {?} [none]: wings
ip rip password
as the password. This string is
none
Possible Values
One or more
selectable
interface indexes
all
? (for a list of
selectable
interface
indexes)
up to 16
alphanumeric
characters
null password
459
[Default]
–
null
password