Ethernet Detail - 3Com SuperStack II 9300 Command Reference Manual

ethernet detail

3500
9000
9400
3900
9300
Displays detailed Ethernet port information including the information in
the summary and additional Ethernet port statistics, such as collision
counters.
Valid Minimum Abbreviation
e d
Important Considerations
Port numbering is consecutive, regardless of module type (if you are
using a system that has modules).
Depending on the system, numbering may or may not skip an empty
slot and continue with the ports that are associated with the next
occupied slot. (See the Implementation Guide for your system for
specific information about port numbering.)
Numbering includes unused ports.
Only one port number is assigned to a Gigabit Ethernet module in
switches that use Gigabit Ethernet modules.
The system no longer assigns port number
management port, which does not receive a port number.
The value that the Ethernet detail command reports for a
rxFrames
bridge port may differ from the value that the bridge port detail
command reports. The Ethernet detail command counts all frames
that are delivered to the port while the bridge port detail command
reports only valid frames that are passed to the port. Therefore, the
Ethernet detail value should exceed the bridge port detail value by the
number of receive errors (
At some prompts, you can specify the
and port numbers. The
Label columns. The Selection column and Port column contain the
same port numbers because they represent your physical ports.
1
).
rxErrs
option to list Ethernet ports
?
option displays Selection, Port, and Port
?
ethernet detail 207
to the out-of-band