3Com SuperStack II 9300 Command Reference Manual page 700

C 22: Q
700
HAPTER UALITY OF
S (Q S) RSVP
ERVICE O AND
Nonflow Classifier Procedure
To accept the default or existing values that appear in brackets [ ], press
Return.
1 Enter a classifier number in the range of from 400 through 498 .
Numbers 401 through 407 are predefined nonflow classifiers with
applied controls; numbers 420, 430, 440, 450, 460, 470, 480, and 490
are predefined nonflow classifiers without controls. If you have not
removed any of the predefined nonflow classifiers, you need to remove
them before you can define another nonflow classifier. (With the default
classifier, there is a limit of 16 predefined nonflow classifiers.)
2 Enter the classifier name (a unique name of up to 32 characters long).
3 Enter a cast type.
For a nonflow classifier, the options are unicast, multicast,
broadcast, and all.
4 Enter one or any protocols.
The options are TCP/IP, IP, IPX, Appletalk, any, or custom.
5 If you choose custom, enter the protocol type (ethernet or
DSAP/SSAP).
For ethernet type enter the hexidecimal value.
For DSAP/SSAP type, enter the DSAP and SSAP hexidecimal
values.
6 Enter one or all IEEE 802.1p tags. Specify any combination of values in
the range of from 0 through 7, or all.
QoS Classifier Define Example (Nonflow Classifier)
Select menu option (qos/classifier): define
Enter classifier number (1-498): 481
Enter classifier name {?}: AppleBcast
Select cast type (unicast,multicast,broadcast|all|?):
broadcast
Select protocols {TCP/IP,IP,IPX,Appletalk,any,custom|?}:
Appletalk
Select IEEE 802.1p tag(s) (0-7|all|?): all