Ip Multicast Igmp Interface Detail - 3Com SuperStack II 9300 Command Reference Manual

3com switch command reference guide
Hide thumbs Also See for SuperStack II 9300:
Table of Contents

Advertisement

C
18: IP M
522
HAPTER
ip multicast igmp
interface detail
3500
9000
9400
3900
9300
ULTICAST
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Supplements the IP multicast IGMP interface summary display with group
and port information.
Valid Minimum Abbreviation
ip m i i d
Fields in the IP Multicast IGMP Interface Detail Display
Field
Index
Address
TtlThreshold
Protocol
Querier
group
port(s)
Description
Number assigned to the routing interface to its right for
identification purposes.
IP address of a routing interface in the system that is
identified by the index number to its left.
Time-to-live (TTL) threshold that is assigned to the
interface. This threshold affects IP multicast packets only.
Multicast routing protocol that registers with IGMP. In
release 3.0 software, there is one supported routing
protocol (DVMRP).
IP address of the IGMP querier in the subnetwork to
which the interface belongs. If the interface is functioning
as the IGMP querier, this field shows Self.
IP multicast group address for which packets have been
received or forwarded
Physical port numbers that are associated with the
interface listed in the Address field that see incoming or
outgoing traffic.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 9000Corebuilder 9400Superstack ii 3900

Table of Contents