Bridge Spanningtree Stppriority - 3Com SuperStack II 9300 Command Reference Manual

bridge spanningTree
stpPriority
3500
9000
9400
3900
9300
Modifies the bridge priority, which influences the choice of the root and
designated bridge s.
Valid Minimum Abbreviation
b sp stpp
Important Considerations
The bridge priority is expressed as a hexidecimal value. The characters
Ox signify this.
The lower the bridge's priority value, the more likely it is that the
bridge is chosen as the root bridge or a designated bridge.
You can change the value while STP is disabled or enabled. If you
change the value while STP is disabled, the value is retained when you
enable STP.
Options
Prompt Description
STP priority Bridge-wide STP parameter

bridge spanningTree stpPriority

Possible Values [Default]
0x0 – 0xffff 0x8000 (factory
default), or
current value
261