Ipx Rip Policy Summary - 3Com SuperStack II 9300 Command Reference Manual

C 20: IPX
632
HAPTER
ipx rip policy
summary
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Display a list of IPX RIP (Routing Information Protocol) policies.
Valid Minimum Abbreviation
ipx ri p s
Fields in an IPX RIP Policy Summary Display
Field
Idx
Origin
Type
Route
Interface
Source
Action
Metric
Weight
Description
Index number of the IPX RIP policy.
Source of the route to which this policy applies. If the
policy type is set to Export, the possible values of this
parameter are RIP or Static. This parameter is not
applicable if the policy type is set to Import.
Import (apply the policy to received routes) or Export
(apply the policy to advertised routes).
One or more IPX network addresses where this policy
applies.
One or more IP interfaces on this router associated with
the RIP policy.
6-byte MAC address of the router that can forward
packets to the network. A source node address of all
zeroes (00-00-00-00-00-00) means that the route is
connected directly to the router.
Whether this router accepts or rejects a route that
matches the policy.
Value the system uses to increase or decrease a route
metric. (This parameter is valid only if the Policy Action is
set to Accept.)
Metric value of this policy.