3Com SuperStack II 9300 Command Reference Manual page 361

Prompt Description
VID Unique, user-defined integer used
by management operations
(for VLANs
other than
the default)
Bridge ports Index numbers of the bridge ports
that belong to the VLAN. To add
trunked ports, specify the anchor
port of the trunk.
Per-port Whether you want to configure
tagging 802.1Q VLAN tagging. You are
prompted to answer for each port
that you selected.
Tag type Either no tagging or IEEE 802.1Q
tagging (the VID)
VLAN name Unique, user-defined name that
identifies members of the VLAN. If
(for VLANs
you use spaces, put quotation
other than
marks around the VLAN name.
the default)
Procedure
1 Enter the VLAN interface index.
2 For a VLAN other than the default VLAN, enter a VLAN identification
(VID) number or keep the default in brackets.
3 Specify the index numbers of the bridge ports.
4 Specify whether you want to modify per-port tagging.
5 If you modify per-port tagging, enter the new tag type for the port (
or ).
802.1Q
6 If you have defined more than one port, enter a tag type for each port.
7 For a VLAN other than the default VLAN, enter a new VLAN name or
keep the current name.
The VLAN name can include up to 32 ASCII characters, including spaces.
If you include spaces, put quotation marks around the VLAN name.
bridge vlan modify (3900/9300/9400/ 9000 Layer 2)
Possible Values [Default]
2 – 4094 Current
VID
One or more Current
index numbers ports in
of the ports that VLAN
are available to
be assigned to
the VLAN
all
? (for a list of
selectable ports)
y (yes) y
n (no)
none Current
tag type
802.1Q
for each
port
Up to 32 ASCII Current
characters or name
spaces
361
none