3Com SuperStack II 9300 Command Reference Manual page 88

C 3: S
88
HAPTER YSTEM
E
NVIRONMENT
While the system sends the files to the host, it displays the name of each
display image that it transfers. When the transmission is complete, the
system displays a message that the transfer is complete and displays the
file name and the name of the host on which it stored the file.
FTP Procedure (3500 Only)
1 Create an empty file with open write permissions on the host to store the
system display images.
2 From the top level of the Administration Console, enter:
system snapshot save
3 Enter the IP address of the host on which you want to save the display
images.
4 Enter the full pathname of the file that you designated.
5 Enter your username and password.
While the system sends the files to the host, it displays the name of each
display image that it transfers. When the transmission is complete, the
system displays a message that the transfer is complete and displays the
file name and the name of the host on which it stored the file.