Ipx Sap Triggered - 3Com SuperStack II 9300 Command Reference Manual

ipx sap triggered

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Sets the SAP Triggered Update mode, which dictates when the IPX
protocol broadcasts newly learned SAP server addresses.
Valid Minimum Abbreviation
ipx sa t
Important Considerations
The system has two SAP triggered modes:
Disabled — Broadcasts IPX SAP server addresses 3 seconds after
learning them.
Enabled — Broadcasts IPX SAP server addresses immediately after
learning them.
Options
Prompt Description
Triggered Setting for IPX SAP broadcast
update mode timing
ipx sap triggered
Possible Values [Default]
disabled enabled
enabled
639