Management Ip Advancedtraceroute - 3Com SuperStack II 9300 Command Reference Manual

C 5: O -O
184
HAPTER UT
management ip
advancedTraceRoute
3500
9000
9400
3900
9300
-B M
F AND ANAGEMENT
Traces a route to a host with one or more of the advanced traceRoute
options.
Valid Minimum Abbreviation
m ip advancedT
Important Considerations
When you specify a host name, the host name and its associated IP
address must be configured on a network name server. Also, you must
add the IP address on the name server to the list of name server
addresses that are associated with the network domain name. See "ip
dns define" in Chapter 16 for more information.
To interrupt the command, press Enter.
Options
Prompt Description
Host name or Host name or IP address of the
IP address destination that you want to ping
Maximum ttl Maximum number of hops that
the system can use in outgoing
probe packets
Destination Destination (or base) UDP port
port number that the system uses in
probe packets. Set the destination
UDP port number to be very high
to ensure that an application at
the destination is not using that
port.
probeCount Maximum number of probes that
the system sends at each TTL level
Wait Wait interval (in seconds) that
determines the maximum amount
of time that the system waits for a
response to a probe
packetSize Number of bytes that the system
sends in each UDP probe packet
Possible
Values [Default]
A valid 0.0.0.0
host
name
IP
address
1 – 255 30
hops
30000 – 33434
65535
1 – 10 3
1 – 10 3
seconds
28 – 4096 28
bytes