Bridge Multicast Igmp Queryipaddress - 3Com SuperStack II 9300 Command Reference Manual

bridge multicast igmp
queryIpAddress
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 2 switching modules only.
Configures the source address that is inserted in IGMP query packets.
Valid Minimum Abbreviation
b mu i queryi
Important Considerations
For the CoreBuilder 9400 and SuperStack II Switch 9300 and 3900
systems, you do not need to used this command as long as you have
one in-band IP interface configured; the system uses its IP address as
the source IP address of query packets. Use this command only if you
want the system to use a different source IP address for query packets.
If there are no in-band IP interfaces configured and you want to
enable querying, you must enter an IP address with this command.
For a CoreBuilder 9000 Layer 2 switching module to offer itself as a
querier, you must enter an IP address with this command.
For the CoreBuilder 3500 system and CoreBuilder 9000 Layer 3
modules, IGMP commands exist under the ip multicast igmp
menu.
Options
Prompt Description
IGMP Query Source address that the
Source IP system uses in its IGMP
Address queries

bridge multicast igmp queryIpAddress

Possible Values
Any unique IP
address in dotted
decimal format
273
[Default]
0.0.0.0, first in-band
IP interface index, or
current value
(3900, 9300, 9400)
0.0.0.0, or current
value (9000 L2)