Park Lamp Output 1 Open - Chrysler Town and Country 2003 Owner's Manual

EXTERIOR LIGHTING
Symptom:

PARK LAMP OUTPUT 1 OPEN

When Monitored and Set Condition:
PARK LAMP OUTPUT 1 OPEN
When Monitored: Ignition on.
Set Condition: The IPM detects high current from the Park Lamp Relay Control circuit.
MISSING RELAY
OPEN FUSE
PARK LAMP RELAY
INTERMITTENT CONDITION
RIGHT FRONT FUSED PARK LAMP RELAY OUTPUT CIRCUIT OPEN
FRONT CONTROL MODULE
INTELLIGENT POWER MODULE
TEST
1 Turn the ignition on.
With the DRBIII , clear all IPM DTC's.
Turn the Park Lamps on.
With the DRBIII , read the DTC information.
Does the DRBIII read: Park Lamp Output 1 Open?
Yes → Go To 2
→ Go To 6
No
2 Turn the ignition off.
Check the IPM to make certain the Park Lamp Relay is present.
Is the Park Lamp Relay present?
Yes → Go To 3
→ Replace the missing Park Lamp Relay.
No
3 Turn the ignition off.
Check the IPM Park Lamp fuse #3.
Is the fuse open?
Yes → Replace the open fuse.
→ Go To 4
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
476
APPLICABILITY
All
All
All