Internal Transmit Failure (Export Only) - Chrysler Town and Country 2003 Owner's Manual

Symptom:

INTERNAL TRANSMIT FAILURE (EXPORT ONLY)

When Monitored and Set Condition:
INTERNAL TRANSMIT FAILURE (EXPORT ONLY)
When Monitored: Continuously with the ignition on during a message transmission.
Set Condition: After 8 internal attempts to transmit the RKE/Thatcham Alarm Module
Bus messages.
INTERMITTENT CONDITION
RKE/THATCHAM ALARM MODULE - INTERNAL MALFUNCTION
TEST
1 Turn the ignition on.
With the DRBIII , erase the current RKE/Thatcham Alarm Module DTC's.
Turn the ignition off, wait 10 seconds then turn the ignition on.
With the DRBIII , read the current RKE/Thatcham Alarm Module DTC's.
Does the DRBIII display: INTERNAL TRANSMIT FAILURE?
Yes → Replace the RKE/Thatcham Alarm Module.
→ The condition that caused this symptom is currently not present.
No
POSSIBLE CAUSES
ACTION
Perform VTSS VERIFICATION TEST - 1A.
Inspect the related wiring harness for a possible intermittent
condition.
Perform VTSS VERIFICATION TEST - 1A.
VEHICLE THEFT/SECURITY
949
APPLICABILITY
All