Park/Turn Signal Lamp Removal; Installation; Rear Fog Lamp Switch - Export Description; Operation - Chrysler PT Cruiser Service & Repair Manual

Hide thumbs Also See for PT Cruiser:

Table of Contents

PARK/TURN SIGNAL LAMP

(1) Remove headlamp access cover in splash shield

(2) Rotate socket counterclockwise one quarter

(3) Remove bulb and socket from headlamp unit.

(4) Disconnect wire connector from back of front

side marker/park/turn signal lamp.

Fig. 32 HEADLAMP ACCESS

1 - HIGH BEAM LAMP

2 - LOW BEAM LAMP

3 - PARK/TURN SIGNAL LAMP

Fig. 33 MULTI-FUNCTION SWITCH WITH REAR FOG LAMP - EXPORT

LAMPS/LIGHTING - EXTERIOR

(1) Connect wire connector to the back of front side

marker/park/turn signal lamp.

(2) Install bulb into headlamp unit (Fig. 32)

(3) Rotate socket clockwise one quarter turn.

(4) Test operation of lamps.

(5) Install headlamp access cover into splash

REAR FOG LAMP SWITCH -

The rear fog lamp switch is incorporated into the

multi-function switch (Fig. 33).

The multi-function switch contains the added cir-

cuitry for the operation of the rear fog lamp switch.

While in the front fog lights position, rotate the end

of the left control stalk past the headlights position

to activate the rear fog lights. (Refer to 8 - ELECTRI-

CAL/LAMPS/LIGHTING

FUNCTION SWITCH - DIAGNOSIS AND TESTING)

for rear fog lamp diagnosis.

EXTERIOR/MULTI-

Show Quick Links

Chapters

Table of Contents