Chrysler Town and Country 2003 Owner's Manual page 540

HEATING & A/C
ACT CKT TEST PASSED, OVERCURRENT DTCS ACTIVE - MTC —
Continued
COMMON DRIVER SHORTED TO IGN OR BATT - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short high on
the Common Door Driver circuit.
MODE CIRCUIT SHORTED TO GROUND - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short low on the
Mode Door Driver circuit.
MODE CIRCUIT SHORTED TO IGN OR BATT - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short high on
the Mode Door Driver circuit.
REAR BLEND CIRCUIT SHORTED TO GROUND - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short low on the
Rear Blend Door Driver circuit.
REAR BLEND CIRCUIT SHORTED TO IGN OR BATT - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short high on
the Rear Blend Door Driver circuit.
REAR MODE CIRCUIT SHORTED TO GROUND - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short low on the
Rear Mode Door Driver circuit.
REAR MODE CIRCUIT SHORTED TO IGN OR BATT - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short high on
the Rear Mode Door Driver circuit.
RECIRC CIRCUIT SHORTED TO GROUND - MTC
When Monitored: When the Actuator Circuit Test is executed.
Set Condition: This message will set if the A/C - Heater Control detects a short low on the
Recirculation Door Driver circuit.
516