Chrysler Town and Country 2003 Owner's Manual page 523

RIGHT REAR TURN SIGNAL OUTPUT OPEN —
TEST
4 Turn the ignition off.
Disconnect the Body Control Module C2 connector.
Measure the resistance of the Right Rear Turn Signal Driver Circuit to ground.
Is the resistance above 5.0 ohms?
Yes → Repair the Right Rear Turn Signal Driver Circuit for an open
→ Replace the Body Control Module.
No
ACTION
condition.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
EXTERIOR LIGHTING
Continued
499
APPLICABILITY
All