Table of Contents
Advertisement
POWER DOORS - SLIDING
INCOMPLETE POWER OPEN - FULL OPEN SWITCH FAILURE —
Continued
TEST
3
With the DRBIII in Inputs/Outputs, read the FULL OPEN SWITCH state.
Open the Sliding Door to mid position.
While monitoring the DRBIII , wiggle the wiring harness from the Power Sliding
Door Module to the Full Open Switch on the lower drive unit.
Did the switch status ever change?
Yes → Repair the Full Open Switch Sense circuit for a short to ground.
→ Go To 4
No
4
If there are no possible causes remaining, view repair.
Repair
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Replace the Full Open Switch (lower drive unit).
Perform BODY VERIFICATION TEST - VER 1.
896
APPLICABILITY
All
All
Advertisement
Table of Contents
