Accessory Power Output 1 Short To B - Chrysler Town and Country 2003 Owner's Manual

Symptom:

ACCESSORY POWER OUTPUT 1 SHORT TO B+

When Monitored and Set Condition:
ACCESSORY POWER OUTPUT #1 SHORT TO B+
When Monitored: Continuously with the ignition on.
Set Condition: The FCM has detected a short to battery voltage in the Accessory Relay
control circuit.
FRONT CONTROL MODULE
FUSE & RELAY CENTER INTERNAL MALFUNCTION
ACCESSORY RELAY
FRONT CONTROL MODULE
INTERMITTENT CONDITION
TEST
1 Turn the ignition on.
With the DRBIII , erase the current Front Control Module DTC's.
Turn the ignition off, wait 10 seconds then turn the ignition on.
With the DRBIII , read the current Front Control Module DTC's.
Does the DRBIII
BATTERY trouble codes?
Yes → Go To 2
→ Go To 3
No
2 Turn the ignition off.
Disconnect the Accessory Relay from the Fuse & Relay Center.
Connect a known good relay to the Accessory Relay location in the Fuse & Relay
Center.
Turn the ignition on.
With the DRBIII , erase the current Front Control Module DTC's.
Turn the ignition off, wait 10 seconds then turn the ignition on.
With the DRBIII , read the current Front Control Module DTC's.
Does the DRBIII
BATTERY trouble codes?
Yes → Replace the Fuse and Relay Center.
→ Replace the original Accessory Relay.
No
POSSIBLE CAUSES
ACTION
display both ACCESSORY POWER OUTPUT SHORTED TO
display both ACCESSORY POWER OUTPUT SHORTED TO
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
IGNITION, POWER, ACCESSORY
591
APPLICABILITY
All
All