Country Code Not Programmed - Chrysler Town and Country 2003 Owner's Manual

COMMUNICATION
Symptom:

COUNTRY CODE NOT PROGRAMMED

SELECT CORRECT COUNTRY CODE
TEST
1 With the DRB, enter Body Computer, Miscellaneous then Change Country Code.
Select the correct country code for the vehicle.
With the DRB, erase BCM DTC's.
Cycle the ignition switch from off to on and wait approximately 1 minute.
With the DRB, read BCM DTC's.
Did this DTC reset?
Yes → Replace the Body Control Module in accordance with the service
→ Test Complete.
No
POSSIBLE CAUSES
ACTION
information.
Perform BODY VERIFICATION TEST - VER 1.
332
APPLICABILITY
All