Table of Contents
Advertisement
*CHIME INOPERATIVE —
TEST
5
Disconnect the Instrument Cluster harness connectors.
Disconnect the BCM harness connector(s).
Measure the resistance of the chime driver circuit between the Instrument Cluster
connector and the BCM connector.
Is the resistance below 5.0 ohms?
→ Repair the chime driver circuit for an open, between the Instru-
No
Yes → Replace the BCM.
Continued
ACTION
ment Cluster and the BCM.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
325
CHIME
APPLICABILITY
All
Advertisement
Table of Contents
