Symptom:
PCI INTERNAL HARDWARE FAILURE
PCI INTERNAL HARDWARE FAILURE
TEST
1
Connect the DRB to the Data Link Connector.
Turn the ignition on.
With the DRB, erase BCM DTC's.
Turn the ignition off then turn the ignition on.
With the DRB, read BCM DTC's.
Did this DTC reset?
Yes → Replace the Body Control Module in accordance with the service
→ Test Complete.
No
POSSIBLE CAUSES
ACTION
information.
Perform BODY VERIFICATION TEST - VER 1.
353
COMMUNICATION
APPLICABILITY
All