Chrysler Town and Country 2003 Owner's Manual page 479

LEFT FRONT TURN SIGNAL OUTPUT OPEN —
TEST
4 Turn the ignition off.
Disconnect the BCM C2 harness connector.
Disconnect the left front turn signal lamp harness connector.
Measure the resistance of the Left Front Turn Signal Output Circuit and ground.
Is the resistance above 5.0 ohms?
Yes → Repair the Left Front Turn Signal Output Circuit for an open
→ Replace the Body Control Module.
No
ACTION
condition.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
EXTERIOR LIGHTING
Continued
455
APPLICABILITY
All