Chrysler Town and Country 2003 Owner's Manual page 968

POWER MIRROR
*PASSENGER FOLDING MIRROR DOES NOT FOLD (EXPORT ONLY) —
Continued
TEST
4 Disconnect the inoperative Power Mirror connector.
Disconnect the Body Control Module C2 connector.
NOTE: Check connectors - Clean/repair as necessary.
Measure the appropriate Folding Mirror Unfold Driver circuit from the BCM C2
connector to the power mirror harness connector.
Is the resistance below 5.0 ohms?
Yes → Go To 5
→ Repair the appropriate Folding Mirror Unfold Driver circuit for
No
5 Disconnect the inoperative Power Mirror connector.
Disconnect the Passenger Folding Mirror Relay.
NOTE: Check connectors - Clean/repair as necessary.
Measure the Passenger Folding Mirror Relay Output circuit from the relay connector
to the mirror harness connector.
Is the resistance below 5.0 ohms?
Yes → Go To 6
→ Repair the Passenger Folding Mirror Relay Output circuit for an
No
6 Disconnect the Body Control Module C2 connector.
Disconnect the Passenger Folding Mirror Relay.
NOTE: Check connectors - Clean/repair as necessary.
Measure the Passenger Folding Mirror Relay Input circuit from the relay connector
to the BCM C2 connector.
Is the resistance below 5.0 ohms?
Yes → Replace the Body Control Module.
→ Repair the Passenger Folding Mirror Relay Input circuit for an
No
ACTION
an open.
Perform BODY VERIFICATION TEST - VER 1.
open.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
open.
Perform BODY VERIFICATION TEST - VER 1.
944
APPLICABILITY
All
All
All