Chrysler Town and Country 2003 Owner's Manual page 495

LEFT REAR TURN SIGNAL OUTPUT OPEN —
TEST
4 Turn the ignition off.
Disconnect the Body Control Module C2 connector.
Disconnect the left rear tail lamp connector.
Measure the resistance of the Left Rear Turn Signal Driver Circuit to ground.
Is the resistance above 5.0 ohms?
Yes → Repair the Left Rear Turn Signal Driver Circuit for an open
No
ACTION
condition.
Perform BODY VERIFICATION TEST - VER 1.
→ Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
EXTERIOR LIGHTING
Continued
471
APPLICABILITY
All