Chrysler Town and Country 2003 Owner's Manual page 67

ACCELEROMETER 1 —
STORED ENERGY FIRING 1
When Monitored: With the ignition on, the module on board diagnostics continuously
performs internal circuit tests.
Set Condition: This DTC will set if the module identifies an out of range internal circuit.
AIRBAG CONTROL MODULE - ACM
SIDE IMPACT AIRBAG CONTROL MODULE
TEST
1 Turn the ignition on.
NOTE: Ensure the battery is fully charged.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
WARNING: IF THE MODULE IS DROPPED AT ANY TIME, IT MUST BE
REPLACED.
Select the appropriate module and DTC type combination:
ACM - ACTIVE DTC
ACM - STORED DTC
SIACM - ACTIVE DTC
SIACM - STORED DTC
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
Continued
POSSIBLE CAUSES
ACTION
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Airbag Control Module in accordance with Service
Instructions.
Perform AIRBAG VERIFICATION TEST - VER 1.
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Airbag Control Module in accordance with Service
Instructions.
Perform AIRBAG VERIFICATION TEST - VER 1.
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Side Impact Airbag Control Module in accordance
with Service Instructions.
Perform AIRBAG VERIFICATION TEST - VER 1.
WARNING: TURN THE IGNITION OFF, DISCONNECT THE
BATTERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Replace the Side Impact Airbag Control Module in accordance
with Service Instructions.
Perform AIRBAG VERIFICATION TEST - VER 1.
43
AIRBAG
APPLICABILITY
All