Chrysler Town and Country 2003 Owner's Manual page 956

POWER MIRROR
FOLD MIRROR OUTPUT FAILURE (EXPORT ONLY) —
TEST
4 Disconnect the Left and Right Power Mirror connectors.
Disconnect the Body Control Module C2 connector.
NOTE: Check connectors - Clean/repair as necessary.
Measure for unwanted voltage on the Left Folding Mirror Unfold Driver circuit in the
BCM C2 connector.
Is there any voltage present?
Yes → Repair the Left Folding Mirror Unfold Driver circuit for a short to
→ Go To 5
No
5 Disconnect the Left and Right Power Mirror connectors.
Disconnect the Body Control Module C2 connector.
NOTE: Check connectors - Clean/repair as necessary.
Measure for unwanted voltage on the Right Folding Mirror Unfold Driver circuit in
the relay connector.
Is there any voltage present?
Yes → Repair the Right Folding Mirror Unfold Driver circuit for a short
→ Go To 6
No
6 Disconnect the Left and Right Power Mirror connectors.
Disconnect the Body Control Module C2 connector.
NOTE: Check connectors - Clean/repair as necessary.
Measure the resistance between ground and the Left Folding Mirror Unfold Driver
circuit in the BCM C2 connector.
Is the resistance below 5.0 ohms?
Yes → Repair the Left Folding Mirror Unfold Driver circuit for a short to
→ Go To 7
No
7 Disconnect the Left and Right Power Mirror connectors.
Disconnect the Body Control Module C2 connector.
NOTE: Check connectors - Clean/repair as necessary.
Measure the resistance between ground and the Right Folding Mirror Unfold Driver
circuit in the relay connector.
Is the resistance below 5.0 ohms?
Yes → Repair the Right Folding Mirror Unfold Driver circuit for a short
→ Replace the Body Control Module.
No
ACTION
voltage.
Perform BODY VERIFICATION TEST - VER 1.
to voltage.
Perform BODY VERIFICATION TEST - VER 1.
ground.
Perform BODY VERIFICATION TEST - VER 1.
to ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
932
Continued
APPLICABILITY
All
All
All
All