Chrysler Town and Country 2003 Owner's Manual page 671

PANEL DIMMING OUTPUT SHORT —
TEST
3 Turn the ignition on.
With the DRBIII , erase Body Control Module DTCs.
Turn the ignition off to the lock position.
Disconnect the Headlamp Switch harness connector.
Turn the ignition on.
With the DRBIII , read DTCs.
Does the DRBIII display PANEL DIMMING OUTPUT SHORT?
Yes → Go To 4
→ Replace the Headlamp Switch in accordance with the Service
No
4 Turn the ignition on.
With the DRBIII , erase Body Control Module DTCs.
Turn the ignition off to the lock position.
Disconnect the I/P Multi-Function Switch harness connector.
Turn the ignition on.
Turn the Headlamps on.
With the DRBIII , read DTCs.
Does the DRBIII display PANEL DIMMING OUTPUT SHORT?
Yes → Go To 5
→ Replace the I/P Multi-Function Switch in accordance with the
No
5 Turn the ignition on.
With the DRBIII , erase Body Control Module DTCs.
Turn the ignition off to the lock position.
Disconnect the Mirror Switch harness connector.
Turn the ignition on.
Turn the Headlamps on.
With the DRBIII , read DTCs.
Does the DRBIII display PANEL DIMMING OUTPUT SHORT?
Yes → Go To 6
→ Replace the Mirror Switch in accordance with the Service Infor-
No
6 Turn the ignition on.
With the DRBIII , erase Body Control Module DTCs.
Turn the ignition off to the lock position.
Disconnect the Rear Blower Control Switch harness connector.
Turn the ignition on.
Turn the Headlamps on.
With the DRBIII , read DTCs.
Does the DRBIII display PANEL DIMMING OUTPUT SHORT?
Yes → Go To 7
→ Replace the Rear Blower Control Switch in accordance with the
No
ACTION
Information.
Perform BODY VERIFICATION TEST - VER 1.
Service Information.
Perform BODY VERIFICATION TEST - VER 1.
mation.
Perform BODY VERIFICATION TEST - VER 1.
Service Information.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
Continued
647
APPLICABILITY
All
All
All
All