Chrysler Town and Country 2003 Owner's Manual page 127

LOSS OF IGNITION RUN ONLY —
ORC RUN ONLY DRIVER OVER VOLT
When Monitored: The FCM uses a microprocessor controlled transistor (high side driver)
to supply power to the ORC. The microprocessor monitors the high side driver (HSD)
battery voltage when the ignition is in the Run position.
Set Condition: The code will set if the microprocessor senses HSD battery voltage is over
30 volts.
ORC RUN ONLY DRIVER SHORT TO GROUND
When Monitored: The FCM uses a microprocessor controlled transistor (high side driver)
to supply power to the ORC. The microprocessor monitors the high side driver (HSD)
circuit for short to ground when the ignition is in the Run position.
Set Condition: The code will set within 1 second, if the microprocessor senses high HSD
internal temperature. The high temperature is caused by short to ground.
ACM, LOSS OF IGNITION RUN ONLY
ACM, ORC RUN ONLY CIRCUIT OPEN
FCM, ORC RUN ONLY CIRCUIT OPEN
IPM, ORC RUN ONLY CIRCUIT OPEN
ORC RUN ONLY DRIVER CIRCUIT OPEN
FCM, ORC RUN ONLY CIRCUIT SHORT
IPM, ORC RUN ONLY CIRCUIT SHORT
ACM, ORC RUN ONLY CIRCUIT SHORT
ORC RUN ONLY CIRCUIT SHORT
HIGH BATTERY VOLTAGE
ORC RUN ONLY OVER VOLTAGE
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
Continued
POSSIBLE CAUSES
103
AIRBAG