Chrysler Town and Country 2003 Owner's Manual page 627

HORN RELAY SHORTED TO B+ —
TEST
3 Turn the ignition off.
Disconnect the Front Control Module from the Fuse and Relay Center.
Disconnect the Horn Relay from the Fuse and Relay Center.
Measure the voltage of the Horn Relay Control circuit at the Fuse and Relay Center
side of the FCM connector.
Is the voltage above 10.0 volts?
Yes → Replace the Fuse and Relay Center.
→ Replace the Front Control Module.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
IGNITION, POWER, ACCESSORY
Continued
603
APPLICABILITY
All