Chrysler Town and Country 2003 Owner's Manual page 451

*LEFT SLIDING DOOR AJAR SWITCH SENSE CIRCUIT OPEN —
TEST
4 Disconnect the Left Sliding Door Lock Motor/Ajar or Latch Sensing Switch harness
connector at the bottom of the sliding door.
Disconnect the BCM C3 connector.
Back probe a jumper wire from the Left Sliding Door Ajar Switch Sense circuit at the
BCM to ground.
Measure the resistance of the Left Sliding Door Ajar Switch Sense circuit between
the BCM C3 connector and the Sliding Door intermediate connector.
Is the resistance below 5.0 ohms?
No
Yes → Replace the Body Control Module.
ACTION
→ Repair the Left Sliding Door Ajar Switch Sense circuit for an open
between the intermediate connector and the Body Control Mod-
ule.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
427
DOOR AJAR
Continued
APPLICABILITY
All