*REMOTE RADIO CONTROLS INOPERATIVE —
TEST
8
WARNING: Turn the ignition off, disconnect the battery and wait 2 minutes
before proceeding.
CAUTION: Do not place an intact undeployed airbag module face down on
a hard surface, the airbag module will propel into the air if accidently
deployed.
Remove the Driver Airbag Module.
Disconnect both remote radio switch harness connectors.
Disconnect the Clockspring C4 harness connector.
Measure the resistance of the Radio Control MUX Return circuit between the
inoperative remote radio switch and the clockspring connector.
Is the resistance below 5.0 ohms?
Yes → Go To 9
→ Repair the Radio Control MUX Return circuit for an open be-
No
9
If there are no possible causes remaining, view repair.
Repair
ACTION
tween the inoperative switch and the clockspring.
Perform BODY VERIFICATION TEST - VER 1.
Replace the inoperative Remote Radio Switch.
Perform BODY VERIFICATION TEST - VER 1.
Continued
197
AUDIO
APPLICABILITY
All
All