IGNITION, POWER, ACCESSORY
Symptom:
INTERNAL DRIVER FAULT #3
When Monitored and Set Condition:
INTERNAL DRIVER FAULT #3
When Monitored: Continuously with the ignition on.
Set Condition: The Front Control Module has detected an internal malfunction of the
module.
FRONT CONTROL MODULE INTERNAL MALFUNCTION
INTERMITTENT CONDITION
TEST
1
Turn the ignition on.
With the DRBIII , erase the current Front Control Module DTC's.
Turn the ignition off, wait 10 seconds then turn the ignition on.
With the DRBIII , read the current Front Control Module DTC's.
Does the DRBIII display: INTERNAL DRIVER FAULT #3?
Yes → Replace the Front Control Module.
→ This symptom represents an internal malfunction in the Front
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Control Module. The condition that caused this symptom is
currently not present.
Perform BODY VERIFICATION TEST - VER 1.
616
APPLICABILITY
All