FRONT WIPER PARK SWITCH SHORT TO GND —
TEST
4
Turn the ignition on.
Turn the front wipers to an intermittent setting.
Using a 12-volt test light connected to 12-volts, back probe the Front Wiper Park
Switch Sense circuit at the Front Wiper Module harness connector.
NOTE: The test light should illuminate when the wipers are parked, then
turn off when the wipers move off of the parked position.
Does the test light turn on and off properly?
Yes → Replace the Front Control Module.
→ Replace the Front Wiper Module.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
WINDSHIELD WIPER & WASHER
983
Continued
APPLICABILITY
All