Chrysler Town and Country 2003 Owner's Manual page 791

LEFT UNLOCK OUTPUT FAILURE —
TEST
3 Disconnect the Body Control Module C2 connector.
Disconnect the Left Front Door Lock Motor/Ajar Switch connector.
Measure the resistance between ground and the Left Front Door Unlock Driver
circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Left Front Door Unlock Driver circuit for a short to
→ Replace the Door Lock Motor.
No
4 Disconnect the Body Control Module C2 connector.
Disconnect the Left Sliding Door Lock Motor connector.
Measure the resistance between ground and the Left Sliding Door Unlock Driver
circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Left Sliding Door Unlock Driver circuit for a short to
→ Replace the Sliding Door Lock Motor (latch assembly).
No
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
Continued
767
APPLICABILITY
All
All