Chrysler Town and Country 2003 Owner's Manual page 713

HORIZONTAL SENSOR OUT OF RANGE HIGH —
TEST
8 Turn ignition off.
Disconnect the Memory Seat Mirror Module C2 connector.
Disconnect the Driver Power Seat Horizontal Position Sensor connector.
Measure the resistance of the Seat Position Sensor Ground wire between the
Horizontal Sensor connector and the C2 connector.
Is the resistance below 5.0 ohms?
Yes → Replace the Memory Seat Mirror Module.
→ Repair the open Seat Sensor Ground wire.
No
ACTION
Perform MEMORY SYSTEM VERIFICATION TEST - VER 1.
Perform MEMORY SYSTEM VERIFICATION TEST - VER 1.
Continued
689
MEMORY SEAT
APPLICABILITY
All