Chrysler Town and Country 2003 Owner's Manual page 673

PANEL DIMMING OUTPUT SHORT —
TEST
11 Turn the ignition off to the lock position.
Disconnect the Body Control Module harness connector.
Disconnect the HVAC Module harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance between ground and the HVAC Module Dimming circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the HVAC Module Dimming circuit for a short to ground.
→ Go To 12
No
12 Turn the ignition off to the lock position.
Disconnect the Body Control Module harness connector.
Disconnect the I/P Multi-Function Switch harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance between ground and the I/P Multi-Function Switch Dimming
circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the I/P Multi-Function Switch Dimming circuit for a short
→ Go To 13
No
13 Turn the ignition off to the lock position.
Disconnect the Body Control Module harness connector.
Disconnect the Mirror Switch harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance between ground and the Mirror Switch Dimming circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Mirror Switch Dimming circuit for a short to ground.
→ Go To 14
No
14 Turn the ignition off to the lock position.
Disconnect the Body Control Module harness connector.
Disconnect the Rear Blower Control Switch harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance between ground and the Rear Blower Control Switch
Dimming circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Rear Blower Control Switch Dimming circuit for a
→ Go To 15
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
to ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
short to ground.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
Continued
649
APPLICABILITY
All
All
All
All