Chrysler Town and Country 2003 Owner's Manual page 868

POWER DOORS - LIFTGATE
IOD WAKE UP OPEN - PLG —
TEST
4 Disconnect the Body Control Module C2 connector.
Disconnect the Power Liftgate Module C2 connector.
Measure the resistance between the Liftgate Module Wake Up Signal circuit and
ground.
Is the resistance below 100.0 ohms?
Yes → Repair the Liftgate Module Wake Up Signal wire for a short to
→ Go To 5
No
5 If there are no possible causes remaining, view repair.
Repair
Continued
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
Replace the Power Liftgate Module.
Perform BODY VERIFICATION TEST - VER 1.
844
APPLICABILITY
All
All