Chrysler Town and Country 2003 Owner's Manual page 758

MEMORY SEAT
RIGHT MIRROR VERTICAL SENSOR OUT OF RANGE LOW —
TEST
3 Turn the ignition off.
Disconnect the Memory Seat Mirror Module C1 connector.
Disconnect the Right Power Mirror connector.
Measure the resistance of the Right Mirror Vertical Position Signal circuit to ground
at the Right Power Mirror harness side connector.
Is the resistance below 1000.0 ohms?
Yes → Repair the Right Mirror Vertical Position Signal wire for a short
→ Replace the Memory Seat Mirror Module.
No
ACTION
to ground.
Perform MEMORY SYSTEM VERIFICATION TEST - VER 1.
Perform MEMORY SYSTEM VERIFICATION TEST - VER 1.
734
Continued
APPLICABILITY
All