Symptom:
*AIRBAG INDICATOR ON WITHOUT ACTIVE TROUBLE CODES
AIRBAG WARNING INDICATOR ON WITHOUT ACTIVE TROUBLE CODES
INSTRUMENT CLUSTER PROBLEMS
TEST
1
NOTE: Ensure the battery is fully charged.
Turn the ignition on.
Make sure that all active DTC's have been repaired before performing this procedure.
With the DRBIII select the PASSIVE RESTRAINTS, AIRBAG, MONITOR DIS-
PLAY and read the WARNING LAMP STATES.
With no active DTCs, Does the LAMP REQ by ACM monitor show ON?
Yes → WARNING: MAKE SURE THE BATTERY IS DISCONNECTED,
No
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
POSSIBLE CAUSES
ACTION
THEN WAIT TWO MINUTES BEFORE PROCEEDING. Replace
the Airbag Control Module in accordance with Service Instruc-
tions.
Perform AIRBAG VERIFICATION TEST - VER 1.
→ Refer to INSTRUMENT CLUSTER CATEGORY symptom list for
problems related to Instrument Cluster.
Perform AIRBAG VERIFICATION TEST - VER 1.
171
AIRBAG
APPLICABILITY
All