Brocade Communications Systems WFT-2D User Manual page 234

6
Dashboard customization
The Out of Range Violations widget includes the following fields and components:
•
•
•
•
•
•
Customizing the Out of Range Violations widget
You can customize the widget to display violations for a specific fabric or group and time frame.
•
•
Viewing additional violations data
1. Click the violation name in the Out of Range Violations widget.
182
Widget title — The widget title.
Widget summary — The color of the worst severity and the number of products with that
severity displays below the widget title.
Refresh time — The time of the last update for the widget.
Name — A list of the MAPS and Fabric Watch dashboard categories with an out of range
violation. Click to access additional details for the violations. For more information, refer to
"Viewing additional violations data"
category does not display. Categories include:
-
Fabric Health
-
FCIP Health
-
FRU Health
-
Port Health
-
Security Violations
-
Switch Resources
-
Switch Status Policy
-
Traffic Performance
Violation Count — The total number of MAPS and Fabric Watch rule violations for each
category. Always displays whether or not there is a violation.
Network Object Count — The number and network object type (such as switch, virtual machine,
port, trunk, and so on) with a MAPS and Fabric Watch violation for each category. Always
displays whether or not there is a violation.
NOTE
For FCIP Health, the Network Object Count is based on the number of VE_port and circuit
combinations with a MAPS violation. For example, if switch A and switch B are connected
through one circuit, and both switch A and switch B report a violation, the Network Object
Count is 2, because the circuit on switch A is considered to be on a different network object
than the circuit on switch B.
To display data for a specific fabric or group, refer to
To display data for a specific duration, refer to
The Out of Range Violations Detailed View page displays with the following fields and
components:
•
Scope — The network and time scope.
•
Time (MAPS and Fabric Watch support) — The time on the server when the violation was
reported.
•
Rule Condition (MAPS and Fabric Watch support) — Associates the condition with the
action triggered when the condition occurs.
on page 182. If there are no violations for a category, the
"Setting the network scope"
"Setting the time interval"
Brocade Network Advisor SAN User Manual
on page 169.
on page 171.
53-1003154-01