Performance Monitors - Brocade Communications Systems WFT-2D User Manual

6
Dashboard customization
•
•
•
•
•
•
•
•
For SAN violations, the following categories display as blank.
•
•
•
Customizing the Port Health Violations widget
You can customize the widget to display violations for a specific fabric and time frame.
•
•
•

Performance monitors

The Management application provides the following preconfigured performance monitors:
TABLE 19 Preconfigure performance monitors
Monitor title
Top Port Alignment Errors
Top Port C3 Discards
Top Port C3 Discards RX TO
Top Port CRC Errors
Top Port Discards
184
State changes — The state of the port has changed for one of the following reasons:
-
The port has gone offline.
-
The port has come online.
-
The port is faulty.
SFP Current — The amount of supplied current to the SFP transceiver.
SFP Receive Power — The amount of incoming laser, in µwatts, to help determine if the SFP
transceiver is in good working condition.
SFP Transmit Power — The amount of outgoing laser, in µwatts. Use this to determine the
condition of the SFP transceiver.
SFP Voltage — The amount of voltage supplied to the SFP transceiver.
SFP Temperature — The physical temperature of the SFP transceiver, in degrees Celsius.
SFP Power On Hours — The number of hours the 16 Gbps SFP transceiver is powered on.
Refreshed — The time of the last update for the widget.
Abnormal Frame Terminations — The number of frames abnormally terminated.
Symbol Errors — The number of undefined or invalid symbols received.
IFG (InterFrame Gap) Errors — The interframe gap between successive frames that is violated.
To display data for a specific fabric or group, refer to
To display data for a specific duration, refer to
Sort the contents by clicking the column header. Click the same column header again to
reverse the sort order.
Description
Table view of the alignment errors measure
Table view of the C3 discards measure
Table view of the C3 discards RX TO measure. There are
four versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports.
Table view of the CRC errors measure. There are four
versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports.
Table view of the discards measure
"Setting the network scope"
"Setting the time interval"
Data collectors
All SAN TE port collector
All SAN FC port collector
All SAN FC port collector
All SAN FC port collector, All SAN TE port
collector
Port discard count collector
Brocade Network Advisor SAN User Manual
on page 169.
on page 171.
53-1003154-01