Brocade Communications Systems WFT-2D User Manual page 229

SAN Inventory widget
The SAN Inventory widget
FIGURE 59
The SAN Inventory widget includes the following data:
•
•
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1003154-01
(Figure
SAN Inventory widget
Widget title — The name of the widget.
Show Legend icon — Click to display the color legend for the widget below the bar chart.
Widget summary — The product count for each status (worst to best order) with the associated
icon displays underneath the widget title.
Time scope — The time scope.
Category list — Use to customize this widget to display a specific group of products. Options
include: Firmware, Model, Location, and Contact.
Bar chart — The product status as a percentage of the total number of products.
The bar chart displays each group as a separate bar on the graph. Displays the current state of
all products discovered for a group in various colors on each bar. Tooltips showing the number
of devices in that state are shown when you pause on the bar. Double-click a bar in the graph
to navigate to the SAN Inventory Detailed View page. For more information, refer to
additional SAN product data"
Color legend — Displays the color legend below the bar chart. Click the Show Legend icon to
display.
-
Green — Healthy: Status obtained from the SAN switch based on Fabric Watch or
Monitoring and Alerting Policy Suite (MAPS) thresholds configured on the switch.
-
Yellow — Marginal: Status obtained from the SAN switch based on Fabric Watch or MAPS
thresholds configured on the switch.
-
Red — Down: Status obtained from the SAN switch based on Fabric Watch or MAPS
thresholds configured on the switch.
-
Blue — Not Reachable: SAN switch is not reachable by HTTP.
-
Gray — Unknown: Temporary status that displays when switch asset collection is in
progress. Once switch asset collection is complete, the current status is obtained from the
switch.
59) displays the SAN products inventory as stacked bar graphs.
on page 178.
Dashboard customization
6
"Viewing
177