Subaru 2002 IMPREZA Service Manual page 1076

MECHANICAL
(3) Engine harness connector
(4) Generator connector, terminal and A/C
compressor connectors
(A) A/C compressor connector
(B) Generator connector and terminal
(5) Accelerator cable
(6) Clutch release spring
ENGINE ASSEMBLY
12) Disconnect the following hoses.
(1) Brake booster vacuum hose
S2M1930
(2) Heater inlet outlet hose
B2M1291I
13) Remove the power steering pump from brack-
et.
(1) Loosen the lock bolt and slider bolt, and
then remove the front side V-belt. <Ref. to
ME(TURBO)-44, FRONT SIDE BELT, REMOV-
AL, V-belt.>
(2) Disconnect the power steering switch con-
nector.
S2M1931
S2M1932
ME(TURBO)-34
EN0204
EN0205
EN0360