Subaru 2002 IMPREZA Service Manual page 1079

26) Support the transmission with a garage jack.
CAUTION:
Before moving the engine away from transmis-
sion, check to be sure no work has been over-
looked. Doing this is very important in order to
facilitate re-installation and because transmis-
sion lowers under its own weight.
27) Separation of the engine and transmission.
(1) Remove the starter. <Ref. to SC-5, RE-
MOVAL, Starter.>
(2) Install the ST to torque converter clutch
case. (AT vehicles)
ST 498277200 STOPPER SET
(3) Remove the bolts which hold right upper
side of transmission to engine.
ENGINE ASSEMBLY
28) Remove the engine from vehicle.
(1) Slightly raise the engine.
(2) Raise the transmission with garage jack.
(3) Move the engine horizontally until the main-
shaft is withdrawn from clutch cover.
(4) Slowly move the engine away from engine
compartment.
CAUTION:
Be careful not to damage adjacent parts or
body panels with crank pulley, oil pressure
gauge, etc.
29) Remove the front cushion rubbers.
S2M1928
H2M1961A
B3M2044
ME(TURBO)-37
MECHANICAL