Subaru 2002 IMPREZA Service Manual page 1103

3) Camshaft oil seal installation:
Apply grease to the new oil seal lips and press onto
the front end of camshaft by using ST1 and ST2.
CAUTION:
Use a new oil seal.
ST1 499587600 OIL SEAL INSTALLER
ST2 499597200 OIL SEAL GUIDE
4) Rocker cover installation:
(1) Install the gasket on rocker cover.
Install the peripheral gasket and ignition coil
gasket.
(2) Apply fluid packing to the four front open
edges of peripheral gasket.
Fluid packing:
THREE BOND 1215 or equivalent
(3) Install the rocker cover on cylinder head.
Ensure the gasket is properly positioned during
installation.
5) Install the spark plug cord.
6) Similarly, install the parts on right-hand side.
CAMSHAFT
7) Install the belt cover No. 2 (RH).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
8) Install the tensioner bracket.
Tightening torque:
S2M1880A
25 N·m (2.5 kgf-m, 18.1 ft-lb)
9) Install the belt cover No. 2 (LH).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
S2M0300B
10) Install the crankshaft sprocket. <Ref. to
ME(TURBO)-58,
Sprocket.>
11) Install the camshaft sprockets. <Ref. to
ME(TURBO)-57,
Sprocket.>
12) Install the timing belt assembly. <Ref. to
ME(TURBO)-50, INSTALLATION, Timing Belt As-
sembly.>
13) Install the belt cover. <Ref. to ME(TURBO)-47,
INSTALLATION, Belt Cover.>
ME(TURBO)-61
MECHANICAL
B2M0738
S2M1163
S2M1162
INSTALLATION, Crankshaft
INSTALLATION, Camshaft