Subaru 2002 IMPREZA Service Manual page 1225

DIAGNOSTICS FOR ENGINE STARTING FAILURE
Step
9 CHECK INPUT VOLTAGE OF ECM.
1)Connect the main relay connector.
2)Turn the ignition switch to ON.
3)Measure the voltage between ECM connec-
tor and chassis ground.
Connector & terminal
(B137) No. 2 (+) — Chassis ground (–):
(B137) No. 3 (+) — Chassis ground (–):
Check
Is the voltage more than 10 V? Check the ignition
EN(TURBO)-65
ENGINE (DIAGNOSTICS)
Yes
Repair the open or
control system. ground short cir-
<Ref. to cuit in harness
EN(TURBO)-66, between ECM
IGNITION CON- connector and
TROL SYSTEM, main relay con-
Diagnostics for nector.
Engine Starting
Failure.>
No