SPARK PLUG
IGNITION
D: ADJUSTMENT
Clean the spark plugs in a sand blast type cleaner.
Avoid excessive blasting. Clean and remove the
carbon or oxide deposits, but do not wear away
porcelain.
If deposits are too stubborn, replace the plugs.
After cleaning the spark plugs, recondition the firing
surface of electrodes with file. Then correct the
spark plug gap using a gap gauge.
Spark plug gap: L
0.7 — 0.8 mm (0.028 — 0.031 in)
S6M0412B
NOTE:
Replace with a new spark plug if this area (A) is
worn to "ball" shape.
IG(TURBO)-7