Subaru 2002 IMPREZA Service Manual page 1078

MECHANICAL
(3) Screw the 6 mm dia. bolt into release fork
shaft, and remove it.
(A) Shaft
(B) Bolt
(4) Raise the release fork, and then unfasten
the release bearing tabs to free release fork.
CAUTION:
Step (4) is required to prevent interference with
engine when removing the engine from trans-
mission.
21) Separate the torque converter clutch from drive
plate. (AT vehicles)
(1) Lower the vehicle.
(2) Remove the service hole plug.
(3) Remove the bolts which hold torque con-
verter clutch to drive plate.
(4) Remove the other bolts while rotating the
engine using ST.
ST 499977300 CRANK PULLEY WRENCH
ENGINE ASSEMBLY
22) Remove the pitching stopper.
23) Disconnect the fuel delivery hose, return hose
and evaporation hose.
CAUTION:
• Catch fuel from the hose into container.
• Disconnect the hose with its end wrapped
with cloth to prevent fuel from splashing.
S2M1936A
24) Remove the fuel filter and bracket.
25) Support the engine with a lifting device and
wire ropes.
S2M0207
ME(TURBO)-36
H3M1839
EN0214
G2M0818
G2M0297