MECHANICAL
B: INSTALLATION
1) Install the clutch release fork and bearing onto
transmission. (MT vehicles)
(1) Remove the release bearing from clutch
cover with flat type screw driver.
(2) Install the release bearing on transmission.
(3) Install the release fork into release bearing
tab.
(A) Release fork
(B) Release bearing
ENGINE ASSEMBLY
(4) Apply grease to the specified points.
• Spline FX2200
• Shaft SUNLIGHT 2
S2M1843
(5) Insert the release fork shaft into release
S2M1937A
fork.
CAUTION:
Make sure the cutout portion of release fork
shaft contacts spring pin.
ME(TURBO)-38
(A) Spline (FX2200)
(B) Shaft (SUNLIGHT 2)
(A) Release fork
(B) Release shaft
(C) Spring pin
S2M1938A
S2M1845A