Power:efficiency:apply - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:POWer:EFFiciency:APPLy

Command Syntax
:POWer:EFFiciency:APPLy
The :POWer:EFFiciency:APPLy command applies the effieciency power
analysis.
Efficiency analysis tests the overall efficiency of the power supply by
measuring the output power over the input power.
Efficiency analysis requires a 4-channel oscilloscope because input voltage, input current,
N O T E
output voltage, and output current are measured.
See Also •
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":MEASure:EFFiciency"
":MEASure:IPOWer" on page 496
":MEASure:OPOWer"
on page 493
on page 499
25
:POWer Commands
553